Appendix 1.26 Fcua-R211 Cable - Mitsubishi Electric M70V Series Connection Manual

Appendix 1.26 FCUA-R211 Cable

Max. cable length: 30m (the maximum length of the cable when connected to the control unit via other
units)
Application: Remote I/O (with terminal block)
between remote I/O,
remote I/O-CNC control unit,
remote I/O-Operation panel I/O unit,
remote I/O-MITSUBISHI CNC machine operation panel A
[RIO1, RIO2, RIO3]
Connector: 1-178288-3
Contact: 1-175218-2 × 3
Recommended manufacturer:
Tyco Electronics
(Note) Fold the cable shield over the sheath, and wrap copper foil tape over it. Connect the wound copper foil
tape to GND plate of the connector.
RIO1,RIO2,RIO3(FCUA-R211)
RIO1,RIO2,RIO3(FCUA-R211)
TXRX 1
TXRX* 2
0V 3
FG
Wire material:
2
MVVS 3C × 0.5mm
Recommended manufacturer: Takeuchi Densen
(FCUA-R211)
(FCUA-R211)
1 TXRX
2 TXRX*
3 0V
FG
Connector: 1-178288-3
Contact: 1-175218-2 × 3
2
(MIC 3C × 0.5mm
)
Recommended manufacturer:
Tyco Electronics
M70V Series Connection Manual
Appendix 1.26 FCUA-R211 Cable
177