Appendix 1.27 Fcua-R300/Fcua-R301 Cable - Mitsubishi Electric M70V Series Connection Manual

MITSUBISHI CNC
Appendix 1 Cable

Appendix 1.27 FCUA-R300/FCUA-R301 Cable

Type: FCUA-R300
Max. cable length: 50m
Application: DI/DO cable (one side connector)
(for remote I/O unit)
[DI-L/DO-L,DI-R/DO-R]
Connector: 7940-6500SC
Recommended manufacturer: 3M
Type: FCUA-R301
Max. cable length: 50m
Application: DI/DO cable (both side connectors)
(for remote I/O unit)
[DI-L/DO-L,DI-R/DO-R]
Connector: 7940-6500SC
Recommended manufacturer: 3M
There are two types of cable for the remote I/O unit: FCUA-R300 and FCUA-R301.
The FCUA-R300 cable has one end cut off, and the FCUA-R301 cable is used for connection to the IDEC terminal
block BX1F-T40A (Note 1). If a cable longer than 3m is required, use the connector set FCUA-CN300 or FCUA-
CS301.
The one-end FCUA-CN300 connector (optional, with one end) includes the DI-L (DI-R) and DO-L (DO-R)
connectors. The FCUA-CS301 connector (optional, with both ends) includes the DI-L (DI-R) and DO-L (DO-R)
connectors, and two connectors for connection with the terminal block (IDEC).
(Note 1) IDEC I/O terminal BX1F-T40A
178
DI-L/DO-L, DI-R/DO-R
Wire material: B40-S
Recommended manufacturer:
Oki Electric Cable
DI-L/DO-L, DI-R/DO-R
Wire material: B40-S
Recommended manufacturer:
Oki Electric Cable
Connector: 7940-6500SC
Strain relief: 3448-7940
Recommended manufacturer: 3M