Mitsubishi Electric M70V Series Connection Manual page 40

[FCU7-MU551 / FCU7-MU552]
(2)
100
52
21
Connector
No.
name
(1) USB Front USB memory I/F
(2) CF Front CF card I/F
Display unit backlight inverter I/F
(3) INV
or driver I/F
(4) DCIN 24VDC input
(5) EMG External emergency stop input
(6) ADONCCB Expansion card slot
(7) LCD Display unit signal I/F
(8) OPT Optical communication I/F
(9) LAN Ethernet I/F
(10) CG71 Operation panel I/O unit I/F
(1) Front USB memory I/F (USB)
Do not connect devices other than USB memories.
When using a commercially available USB memory, performance check must be made by machine tool builder.
(2) Front CF card I/F (CF)
It is recommended to use CF cards of the original equipment manufactured parts. Mitsubishi is unable to guarantee
the machine operation when a commercially available CF card or SD memory card (SD-CF adapter is required) is
used. In that case, performance check must be made carefully by machine tool builder.
(Refer to "2.11 Precautions for Use of Exclusive CF cards for MITSUBISHI CNC: Commercially Available CF".)
(3) (4) (5)
(8) (9) (10)
Function No.
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
M70V Series Connection Manual
(6) (7)
235
214
208
(16) (20)
(11) (12) (13) (14) (15) (17) (18)
Connector
Function
name
RIO1 Remote I/O unit I/F
MENUKEY Menu key I/F
Encoder input 1ch
ENC (5V manual pulse generator
input 2ch)
SKIP Skip input 8ch
Serial communication (RS-
SIO
232C) I/F 2ch
BAT Battery (Q6BAT) I/F
Touch panel I/F
FG FG terminal
LED
Slide switch
2.2 Control Unit
6
(19)
15