Mitsubishi Electric M70V Series Connection Manual page 226

(3) Servo communication cable [SH21 cable]
Control panel
Control unit
- Use a shield clamp within 10cm from the panel's inlet/outlet.
- When using a ferrite core, install it on both ends of the connected units.
(4) Ethernet cable
Operation panel
Control unit
- Use a shielded cable. Use a shield clamp within 10cm from the panel's inlet/outlet.
- When using a ferrite core, install it on both ends of the connected units.
Shield clamp
Control panel
Drive section unit
SH21B
cable
Ferrite core
Shield clamp
Ethernet cable
Ferrite core
M70V Series Connection Manual
Appendix 2.5 Measures for Wiring in Panel
Control panel
Peripheral device
201