Handle Numbers; Connecting With Machine Operation Panel - Mitsubishi Electric M70V Series Connection Manual

4.3.3.1 Handle Numbers

Unit configuration decides handle Nos.
"ENC": Connector on control unit "MPG": Connector on operation panel I/O unit
Operation panel I/O unit (FCU7-DX71x/ DX72x/ DX73x/DX621)
Used
Not used
(Note) If one handle is only connected to "MPG", the handle connected to "ENC" 1ch will still be treated as the 3rd
handle. "ENC" 2ch is not employed when an operation panel I/O unit is used.

4.3.4 Connecting with Machine Operation Panel

Connect the machine operation panel to the connector CG31, CG32, CG33, CG34, CG35 or CG36.
Operation panel I/O unit
CG31/CG33/CG35
CG32/CG34/CG36
<Related items>
Cable drawing: "Cable: F351 Cable"
Connector pin assignment: "General Specifications: Operation Panel I/O Unit" (CG31/CG32/CG33/CG34/CG35/
CG36 connector)
4.3 Connection of Operation Panel I/O Unit
1st handle
"MPG" 1ch
"ENC" 1ch
Machine Operation Panel (Example)
F351
M70V Series Connection Manual
2nd handle 3rd handle
"MPG" 2ch "ENC" 1ch (Note)
"ENC" 2ch -
125