Mitsubishi Electric M70V Series Connection Manual page 76

[Analog signal input/output (AIO)]
The analog signal output circuit can be used only for FCUA-DX120/DX121.
Output circuit
AO
AO*
Output conditions
Output voltage
Resolution
Load conditions
Output impedance
(Note)
CAUTION
1. When using an inductive load such as a relay, always connect a diode in parallel to the load.
2. When using a capacitive load such as a lamp, always connect a protective resistor serially to the load to
suppress rush currents.
R
R
220
DAC
0V(RG)
0V to ± 10V ( ± 5%)
12bit ( ± 10V × n/4096) (Note)
10kΩ load resistance
220Ω
0 11
n=(2 to 2 )
M70V Series Connection Manual
2.6 Remote I/O Unit
51