D Mini Scope Screen Display; D Scope Set Mode - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT

D Mini scope screen display

The mn scope screen can be dsplayed wth another
screen dsplay, such as the set mode menu, decode
screen, memory lst screen, etc. smultaneously.
q Set the scope mode (center or fxed), marker, atten-
uator, span, etc. n advance. (pgs. 65, 66)
w Push and hold [MAIN/SUB M.SCOPE] for 1 sec. to
select the mn scope ndcaton.
• The S/RF meter type durng mn scope dsplay can be
selected n the dsplay set mode (Meter Type (Wde
Screen) tem). (p. 126)

D Scope set mode

Ths set mode s used to set the waveform color,
sweepng speed, scope range for fxed mode, etc.
q Durng spectrum
[SET] (F-6) to select the scope set mode screen.
• Push [WIDE] (F-6) to toggle the screen sze between
normal and wde.
w Push [Y] (F-1) or [Z] (F-2) to select the desred set
tem.
e Set the desred condton usng the man dal.
• Push and hold [DEF] (F-4) for 1 sec. to select the default
condton or value.
• Push [Ω ≈] (F-3) to select the set contents for some
tems.
r Push [EXIT/SET] to ext from the set mode.
67
scope dsplay ON, push
MAIN
/SUB
M.SCOPE M.SCOPE
SET
F-6
F-1 F-2 F-3 F-4 EXIT/SET
DEF
Main dial