D Mini Scope Screen Indication; D Scope Set Mode - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT

D Mini scope screen indication

The mini scope screen can be displayed with another
screen display, such as set mode menu, decode
screen, memory list screen, etc. simultaneously.
q Set the scope mode (center or fixed), marker,
attenuator, span, etc. in advance.
w Push and hold [MAIN/SUB M.SCOPE] for 1 sec. to
select the mini scope indication.
• The S/RF meter type during mini scope indication can
be selected in display set mode (Meter Type (Wide
Screen) item). (p. ??)

D Scope set mode

This set mode is used to set the waveform color,
sweeping speed, scope range for fixed mode, etc.
q During spectrum scope display ON, push
[SET] (F-6) to select scope set mode screen.
• Push [WIDE] (F-6) to toggle the screen size between
normal and wide.
w Push [Y] (F-1) or [Z] (F-2) to select the desired
set item.
e Set the desired condition using the main dial.
• Push and hold [DEF] (F-4) for 1 sec. to select the
default condition or value.
• Push [Ω ≈] (F-3) to select the set contents for some
items.
r Push [EXIT/SET] to exit from set mode.
67
(pgs. ??, ??)
MAIN
/SUB
M.SCOPE M.SCOPE
SET
F-6
F-1 F-2 F-3 F-4 EXIT/SET
DEF
[DIAL]