D Keyer Set Mode - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT

D Keyer set mode

This set mode is used to set the memory keyer repeat
time, dash weight, paddle specifications, keyer type,
etc.
[MODE]
[F-1]
[MENU/GRP]
1 K K e e y y e e r r R R e e p p e e a a t t T T i i m m e e
When sending CW using the repeat timer, this item
sets the time between transmission.
2 D D o o t t / / D D a a s s h h R R a a t t i i o o
This item sets the dot/dash ratio.
Keying weight example: Morse code "K"
Weight setting: DASH
1:1:3 (default)
Weight setting:
Adjusted
Adjustable range
*SPACE and DOT length can be adjusted with
"Key Speed" only in the quick set mode.
49
[F-2] [F-3] [F-4]
DOT (Fixed*)
DASH
SPACE (Fixed*)
• Setting the electronic keyer
q Select CW mode with [MODE].
w Select S S - - 1 1 .
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group S S .
• Push [MENU/GRP] momentarily one or more times to
select the menu S S - - 1 1 .
e Push [F-2 K K E E Y Y ] then [Z Z (
keyer root menu.
• If the keyer root menu appears, skip pushing
[Z Z (
)]. The keyer starting menu can be
/
MENU GRP
changed in the miscellaneous (others) set mode. (see
p.134)
r Push [F-4 S S E E T T ] to enter the keyer set menu.
t Push [F-1 ≤ ≤ ] or [F-2 ≥ ≥ ] to select the desired set
item.
• Push and hold [F-4 D D E E F F ] for 1 sec. to select the de-
fault condition or value.
y Push [Z Z (
)] twice to exit the keyer set
/
MENU GRP
menu and return to normal CW mode indication.
• 1 to 60 sec. in 1 sec. steps can be selected.
• Push and hold [F-4 D D E E F F ] for 1 sec. to select a de-
fault setting. (default: 2 sec.)
• 1 : 1 : 2.8 to 1 : 1 : 4.5 can be set.
• Check the ratio with side tone in CW mode.
• Push and hold [F-4 D D E E F F ] for 1 sec. to select a de-
fault ratio of 1 : 1 : 3.0.
)] to select the
/
MENU GRP