Memory Channel List - Icom IC-7000 Instruction Manual

8
MEMORY OPERATION

■ Memory channel list

The memory channel list simultaneously shows 7
memory channels and their programmed contents.
You can select a desired memory channel from the
memory channel list.
D Selecting a memory channel using the memory channel list
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[MENU/GRP] [F-1]
q Select M M - - 2 2 .
w Push [F-4 V V / / M M ] to select memory mode.
e Push [F-1] (M M E E M M , L L S S T T ) twice to enter the memory
channel list.
r Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
t Rotate [M-ch] (inner) control to select the desired
memory channel.
• All memory channels including blank channels can be
selected.
• [Y Y ]/[Z Z ] on the microphone also changes the channels.
y To
exit the
[Z Z (
)] twice.
/
MENU GRP
103
[F-4]
memory channel list,
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M M , S S or G G (Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from: M M - - 1 1 , M M - - 2 2 or M M - - 3 3
push
Either Either
Y or Z Y Z
or
MEM
Push
LST
Push
Rotate