Icom IC-7000 Instruction Manual page 139

■ Miscellaneous (others) set mode
13 D D U U P P O O f f f f s s e e t t 1 1 4 4 4 4 M M
This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for an 144 MHz band only.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.
14 D D U U P P O O f f f f s s e e t t 4 4 3 3 0 0 M M
This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for the 430 MHz band. only
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.
15 O O n n e e T T o o u u c c h h R R e e p p e e a a t t e e r r
This item turns the one touch repeater function ON
(D D U U P P - - , D D U U P P + + ) and OFF.
When [F-2 D D U U P P ] (M-3) is pushed and held for 1 sec.,
the selected offset direction and programmed duplex
offset frequency (depending on the operating fre-
quency band) is set with the displayed frequency.
16 A A u u t t o o R R e e p p e e a a t t e e r r
This item turns the auto repeater function ON-1 (auto
duplex setting), ON-2 (auto duplex setting and acti-
vating tone encoder) or OFF.
See p. 65 for details concerning the auto repeater
function.
17 T T u u n n e e r r ( ( A A u u t t o o S S t t a a r r t t ) )
The optional AT-180
ANTENNA TUNER
start capability which starts tuning if the SWR is
higher than 1.5–3:1.
When "OFF" is selected, the tuner remains OFF even
when the SWR is poor (1.5–3:1). When "ON" is se-
lected, automatic tune starts even when the tuner is
turned OFF.
(continued)
D D U U P P - -
Minus offset direction is se-
lected. (default)
O O N N - - 1 1
Auto duplex setting is ON.
(default)
O O N N
has an automatic
Automatic tune function is
ON.
Even when "ON" is selected, automatic tune does
not start for the 50 MHz band.
SET MODE
0 0 . . 6 6 0 0 0 0 M M H H z z
0.6 MHz offset (default)
5 5 . . 0 0 0 0 0 0 M M H H z z
5 MHz offset (default)
O O F F F F
One touch repeater function
is OFF.
O O F F F F
Auto repeater function is
OFF.
O O F F F F
Automatic tune function is
OFF. (default)
13
13
130