Memory Clearing - Icom IC-7000 Instruction Manual

■ Memory clearing

Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q Select M M - - 2 2 .
w Push [F-4 V V / / M M ] momentarily to select the memory
mode.
e Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
r Rotate [M-ch] to select the memory channel to be
cleared.
t Push and hold [F-3 M M C C L L ] for 1 sec. to clear the
contents.
• The programmed frequency and operating mode dis-
appear and " " appears.
y To return to VFO mode, push [F-4 V V / / M M ] again.
D Memory clearing using the memory channel list
q Select M M - - 2 2 .
w Push [F-4 V V / / M M ] to select memory mode.
e Push [F-1] (M M E E M M , L L S S T T ) twice to enter the memory
channel list.
r Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
t Rotate [M-ch] to select the memory channel to be
cleared (blanked).
y Push and hold [F-3 M M C C L L ] for 1 sec. to clear the
contents.
u Push [Z Z (
)] twice to exit the memory
/
MENU GRP
channel list.
MEMORY OPERATION
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[MENU/GRP] [F-3] [F-4]
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[MENU/GRP] [F-1] [F-3] [F-4]
8
MCL
Push for
1 sec.
MCL
Push for
1 sec.
Programmed frequency
and operating mode
disappear.
8
106