Icom IC-7000 Instruction Manual page 67

Convenient functions for receive (continued)
• DSP noise reduction (p. 79)
➥ Push [NR/LEV] to turn the DSP noise reduction
ON and OFF.
• " " appears when the DSP noise reduction is set to
ON.
➥ Push [NR/LEV] for 1 sec. to enter the noise re-
duction level set mode, then rotate [DIAL] to ad-
just the DSP noise reduction level.
• Manual notch filter (pgs. 80, 81)
➥ Push [MNF/ADJ] to turn the manual notch filter
ON and OFF.
• " " appears when the manual notch filter is set to
ON.
➥ Push and hold [MNF/ADJ] for 1 sec. to enter the
manual notch filter set mode.
• Push [F-2 N N F F 1 1 ], [F-3 N N F F 2 2 ] to select the notch filter,
push [F-4 N N W W ] to set the filter width, rotate [DIAL] to
set the notch frequency.
D Convenient functions for transmit
• Transmit quality monitor (p. 87)
➥ Push [AF( )], then [F-4 O O T T H H ] to enter the mis-
SET
cellaneous (others) set mode. Select an item with
[F-1 ≤ ≤ ]/[F-2 ≥ ≥ ], then rotate [DIAL] to turn the
monitor function ON and OFF.
• VOX (voice operated transmit) (p. 83)
➥ While "M M 3 3 " is selected, push [F-1 V V O O X X ] to turn
- -
the VOX function ON and OFF.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M M .
• Push [MENU/GRP] momentarily one or more times
to select the menu M M - - 3 3 .
• " " appears when the VOX function is set to ON.
➥ While "M M - - 3 3 " is selected, push and hold [F-1 V V O O X X ]
for 1 sec. to enter the VOX set mode.
• Push [F-1 ≤ ≤ ]/[F-2 ≥ ≥ ] to select an item.
• Rotate [DIAL] to set the value/conditions.
RECEIVE AND TRANSMIT
• Auto notch filter (p. 80)
➥ Push [ANF/• REC] to turn the auto notch filter ON
and OFF.
• " " appears when the auto notch filter is set to ON.
• VSC (voice squelch control) (p. 82)
➥ While "S S - - 1 1 " is selected, push [F-4 V V S S C C ] to turn
the VSC function ON and OFF.
• " " appears when VSC function is set to ON.
4
4
58