Break-In Function; D Semi Break-In Operation; D Full Break-In Operation - Icom IC-7000 Instruction Manual

6
FUNCTIONS FOR TRANSMIT

■ Break-in function

The break-in function is used in CW mode to automat-
ically switch the transceiver between transmit and re-
ceive when keying. The IC-7000 is capable of full
break-in or semi break-in.

D Semi break-in operation

During semi break-in operation, the transceiver se-
lects transmit when keying, then automatically returns
to receive after a pre-set time from when you stop
keying.
• Semi break-in operation
q Push [MODE] to select CW or CW-R mode.
w Select M M - - 3 3 .
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M M .
• Push [MENU/GRP] momentarily one or more times to
select the menu M M - - 3 3 .
e Push [F-1 B B R R K K ] once or twice to turn the semi
break-in function ON.
• " " appears.
[MENU/GRP]
When using a paddle, set "K K e e y y S S p p e e e e d d " in the
quick set mode to adjust the keying speed. (p. 122)

D Full break-in operation

During full break-in operation, the transceiver auto-
matically switches to receive between keying dots
and dashes so that the operator can hear activity on
the channel when transmitting.
[MENU/GRP]
85
Appears
[F-1]
Appears
[F-1]
• Break-in delay setting
q Push [MODE] to select CW or CW-R mode.
w Select M M - - 3 3 .
e Push and hold [F-1 B B R R K K ] for 1 sec. to enter the
break-in delay time set mode.
r Rotate [DIAL] to set the break-in delay time (the
delay from transmit to receive).
[MENU/GRP] [F-1]
q Push [MODE] to select CW or CW-R mode.
w Select M M - - 3 3 .
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M M .
• Push [MENU/GRP] momentarily one or more times to
select the menu M M - - 3 3 .
e Push [F-1 B B R R K K ] once or twice to turn the semi
break-in function ON.
• " " appears.
When using a paddle, set "K K e e y y S S p p e e e e d d " in the
quick set mode to adjust the keying speed. (p. 122)
[DIAL]