D Contest Number Set Mode - Icom IC-7000 Instruction Manual

D Contest number set mode

This menu is used to set the contest (serial) number
and incrementing trigger channel, etc.
[MODE]
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
1 N N u u m m b b e e r r S S t t y y l l e e
This item sets the numbering system used for contest
(serial) numbers— normal or cut numbers.
2 C C o o u u n n t t U U P P T T r r i i g g g g e e r r
This selects which of the four memory channels will
send the contest serial number. The count up trigger
increments the serial number automatically after each
complete serial number is sent.
3 P P r r e e s s e e n n t t N N u u m m b b e e r r
This item shows the current number in the count up
trigger channel set above.
RECEIVE AND TRANSMIT
• Setting the contact (serial) number
Contact number can be automatically transmitted
from one of the memory keyer channels. The Morse
cut numbers can be used as the contact numbers.
The maximum number for contact numbers is 9999.
q Select CW mode with [MODE].
w Select S S 1 1 .
- -
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group S S .
• Push [MENU/GRP] momentarily one or more times to
select the menu S S - - 1 1 .
e Push [F-2 K K E E Y Y ] then [Z Z (
keyer root menu.
• If the keyer root menu appears, skip pushing
[Z Z (
)]. The keyer starting menu can be
/
MENU GRP
changed in the miscellaneous (others) set mode. (see
p.134)
r Push [F-3 0 0 0 0 1 1 ] to enter the contest number set
menu.
t Push [F-1 ≤ ≤ ] or [F-2 ≥ ≥ ] to select the desired set
item.
• Push and hold [F-4 D D E E F F ] for 1 sec. to select the de-
fault condition or value.
y Push [Z Z (
)] twice to exit the contest num-
/
MENU GRP
ber set menu and return to normal CW mode indi-
cation.
Normal : Does not use morse cut number
(default)
190➜ANO: Sets 1 as A, 9 as N and 0 as O.
190➜ANT : Sets 1 as A, 9 as N and 0 as T.
90➜ NO : Sets 9 as N and 0 as O.
90➜ NT : Sets 9 as N and 0 as T.
• M1, M2, M3 and M4 can be set. (default: M2)
• Rotate [DIAL] to change the number, or push [F-4
C C L L R R ] for 1sec. to reset the current number to 001.
4
)] to select the
/
MENU GRP
4
48