D Menu S-1 Functions; D Menu S-2 Functions - Icom IC-7000 Instruction Manual

1
PANEL DESCRIPTION

D Menu S-1 functions

DURING SSB/AM OPERATION:
VO
F-1 F-2
DURING CW OPERATION:
VO KEY MET
F-1 F-2
DURING RTTY OPERATION:
VO DEC
F-1 F-2
DURING FM/WFM OPERATIONS:
VO DTM
F-1 F-2
VO (p. 93)
Push to enter the voice recorder mode.
VO
• The voice TX/RX menu or voice root menu
appears depending on the "V V O O I I C C E E 1 1 s s t t
F-1
M M e e n n u u " setting in the miscellaneous (others)
set mode. (p. 134)
METER SELECTION (p. 36)
Push to select the type of metering dis-
MET
played (during transmit) on the display.
F-3 • Power, SWR, ALC or COMP metering can be
selected.
• Only the S-meter is available during receive.
VOICE SQUELCH CONTROL (p. 82)
VSC
Push to toggle the voice squelch control
function ON and OFF.
F-4
KEYER OPERATION (p. 45)
KEY
Push to enter the memory keyer mode.
• The keyer send menu or keyer root menu ap-
pears depending on the "K K E E Y Y E E R R 1 1 s s t t
F-2
M M e e n n u u " setting in the miscellaneous (others)
set mode.(p. 134)
RTTY DECODER FUNCTION (p. 54)
DEC
Push to toggle the RTTY decoder display
ON and OFF.
F-2
• RTTY decoder screen appears.
7
MET VSC
F-3 F-4
VSC
F-3 F-4
MET VSC
F-3 F-4
MET VSC
F-3 F-4
DTMF OPERATION
DTM Push to enter DTMF memory mode.
(p. 67)
F-4
• The DTMF send menu or DTMF root menu
appears depending on the "D D T T M M F F 1 1 s s t t
M M e e n n u u " setting in the miscellaneous (others)
set mode. (p. 134)

D Menu S-2 functions

DURING VFO MODE:
SCN PRI
F-1 F-2
DURING MEMORY MODE:
SCN SEL
F-1 F-2
SCAN (pgs. 111–113)
➥ Push momentarily to start or stop the
SCN
scan function.
F-1
PRIORITY WATCH (p. 113)
PRI Push to start or stop priority watch.
F-2
VFO/MEMORY SELECTION
➥ Push momentarily to toggle VFO and
V/M
memory modes. (pgs. 27, 100)
➥ Push and hold for 1 sec. to transfer the
F-3
frequency and operating mode in the se-
lected memory channel to the currently
displayed VFO. (p. 107)
VOICE SQUELCH CONTROL (p. 82)
VSC
Push to toggle the voice squelch control
function ON and OFF.
F-4
SELECT SCAN
➥ Push momentarily to toggle the select
SEL
scan settings ON and OFF for the se-
F-2
lected memory channel. (pgs. 104, 113)
➥ Push and hold for 2 sec. to clear all select
scan setting. (p. 113)
➥ While scanning, push to toggle the se-
lected memory scan ON and OFF.
(p. 113)
V/M VSC
F-3 F-4
V/M VSC
F-3 F-4