Operating Rtty (Fsk) - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT

■ Operating RTTY (FSK)

When using your RTTY terminal or TNC, consult the
manual that comes with the RTTY terminal or TNC.
q Push [Y Y ( )]/[Z Z (
BAND
band or push a band key on the HM-151.
w Push [MODE] momentarily to select RTTY mode.
• After RTTY mode is selected, push and hold [MODE]
for 1 sec. to toggle between RTTY and RTTY-R modes.
e Display the RTTY decoder screen.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group S S .
• Push [MENU/GRP] momentarily one or more times to
select the menu S S - - 1 1 .
• Push [F-2 D D E E C C ] to display the Baudot decoder screen.
r Rotate [DIAL] to tune in a desired signal.
• Use [F-2 1 1 / / 4 4 ] in the M M - - 3 3 display when critical setting
is required.
• S-meter indicates received signal strength when signal
is received.
• If the received signal cannot be demodulated, try se-
lecting RTTY-R mode (or RTTY mode).
t Transmit a SEND signal from your TNC.
• [TX] indicator lights red.
• The Po meter indicates transmitted RTTY signal
strength.
y Operate the connected PC or TNC (TU) to trans-
mit RTTY (FSK) signals.
51
)] to select the desired
BAND
[AF] [MODE] [TX] indicator
[MENU/GRP] [F-2]
"RTTY" or "RTTY-R" appears
[Y]
[Z]
[DIAL]