Doors - Interlogix CDC4 Installation And Programming Manual

Chapter 2: System functions

Doors

CDC4 can support up to four doors in standard mode, and up to eight doors in
extended mode. The doors are numbered from 17 to 64 or from 17 to 112,
depending on which operating mode CDC4 is working in.
Door controllers may use the first 12 addresses on the Advisor Advanced system
bus. Table 7 below the address of CDC4 (set via DIP switches), the DGP number
that CDC4 is polled as, and the ranges of door numbers.
Table 7: Door numbers per expander address
Address
1
2
3
4
5
6
7
8
9
10
11
12
Each door controlled by CDC4 can have two door contact inputs, an RTE
(request to exit) input, two lock outputs, a DOTL (Door Open Too Long) output, a
forced door output, a warning output, and six assigned readers in any
combination of IN and OUT readers.
Each door has various options for access, shunting, RTE, high security users,
and anti-passback. There are also options for alarm control.
Doors are programmed on the Doors form in Downloader. See the "Doors"
section on page 97.
48
Polled as
Exp 1
Exp 2
Exp 3
Exp 4
Exp 5
Exp 6
Exp 7
Exp 8
Exp 9
Exp 10
Exp 11
Exp 12

Doors

Standard mode
17 to 20
21 to 24
25 to 28
29 to 32
33 to 36
37 to 40
41 to 44
45 to 48
49 to 52
53 to 56
57 to 60
61 to 64
CDC4 Door Controller Installation and Programming Manual
Extended mode
17 to 24
25 to 32
33 to 40
41 to 48
49 to 56
57 to 64
65 to 72
73 to 80
81 to 88
89 to 96
97 to 104
105 to 112