Interlogix CDC4 Installation And Programming Manual page 115

Door controller
Table of Contents

Advertisement

Wiegand Chubb (36 bit): For Wiegand Chubb 36 bit format.
Wiegand 26 bit: For standard 26-bit Wiegand format readers. Has a 16-bit
card number (0-65534) and an 8-bit site code (0-255).
Mag card ATS: For ATS format magnetic swipe cards.
Mag card Midas: For Midas format magnetic swipe cards.
Kastel 32 bit: For Kastel format cards.
LCD RAS
Set to On if the reader has LCD (liquid crystal display).
Enable RTE
Set to On if the reader has an RTE button connected to the reader IN or RTE
terminal.
RAS location
Program the reader's location using the scheme described in the "Flexible device
locations" section on page 63.
Wiegand LED behaviour
Note:
This option has impact only on the on-board Wiegand interface and
2D Wiegand Interface (for future use).
Select the reader LED behaviour from the following options:
LED 1 on when locked: LED 1 is on when the door is locked.
LED 1 on when unlocked: LED 1 is on when the door is unlocked.
LED 1 on when area is armed: LED 1 indicates if the area assigned to the
door is armed (if more than one area is assigned, all areas assigned to the
door must be armed before LED changes state).
LED 1 off when area is armed: LED 1 indicates if the area assigned to the
door is disarmed (if more than one area is assigned, all areas assigned to the
door must be disarmed before LED changes state.)
Two LED access/secure: Readers with dual LED control lines connected
indicate the area disarmed and armed with different LED colours.
Two LED valid/void: Readers with dual LED control lines connected indicate
User Valid or Void using different LED colours.
LEDs disabled: No LED control.
Note: On readers with dual LED control lines, LED 2 may also be programmed to
indicate other conditions via the CDC4 macro logic programming.
LED mapping
The LED mapping allows the operator to program which area number is assigned
to the reader area LEDs, if applicable.
CDC4 Door Controller Installation and Programming Manual
Chapter 4: Menu reference
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents