Clock Source; Figure 5-4. Setting Network Type Options; Table 5-4. Network Type Commands - ADTRAN DSU III ARdc User Manual

1=LOCAL
3=CONFIG
2=REMOTE

Figure 5-4. Setting Network Type Options

Table 5-4 shows the equivalent AT commands that perform the same con-
figuration functions.
Panel
1=DEDICATED
2=AT&T/MCI
3=US SPRINT
When AT&T/MCI SW56 or US SPRINT SW56 is selected, the Main menu dis-
plays the DIAL selection.

Clock Source

The CLOCK SOURCE options specify the timing source for the DSU III
ARdc's internal circuitry. The factory default setting is FROM NET-
WORK (see Figure 5-5).
61200270L1-1
1=NETWORK OPT.
ENTER ADDRESS 2=DTE OPTIONS
3=TEST OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND

Table 5-4. Network Type Commands

Front AT
Command
&L0
&L1
&L2
DSU III ARdc User Manual
Chapter 5. Configuring Network Options
1=LOOP RATE
2=NETWORK ADDR
3=REMOTE CONFIG.
4=NETWORK TYPE
5=CLOCK SOURCE
Description
Any 4-wire DDS network
AT&T/MCI Switched 56 service
US SPRINT Switched 56 service
1=DEDICATED
2=AT&T/MCI SW56
3=US SPRINT SW56
5-5