Chapter 9 Manual Command; Manual Command - ADTRAN DSU III ARdc User Manual

Chapter 9

MANUAL COMMAND

The MANUAL COMMAND option is a shortcut method for entering
configuration and control commands for the DSU III ARdc.
Figure 9-1 shows the menu path for MANUAL COMMAND. The avail-
able manual commands are listed in Table 9-1. When using the front
panel, perform the following steps to enter a manual command:
1.
2.
3.
4.
5.
6.
7.
8.
61200270L1-1
Select 3=CONFIG from the Main menu.
Select 1=LOCAL.
Select 5=MANUAL COMMAND.
The first display prompts for command number entry:
COMMAND: 00
Use the Up Arrow key to delete the current entry, then use the num-
ber keys to enter the new value. Press Shift to activate letters A-F.
Press Enter to complete the command entry.
Once the command number is entered, the display shows both the
command number and the present value or setting for the command.
The command value can be edited or reissued with the existing
value.
COMMAND: XX
VALUE: 00
Use the number keys to enter the hexadecimal value. Press Enter to
complete. The system briefly displays Command Accepted (if the
entry is valid) and returns to the active menu.
DSU III ARdc User Manual
Manual Command
9-1