Table of Contents
Advertisement
Chapter 11. Testing and Troubleshooting
Initiating a Test
Initiate tests using the following procedure:
1.
2.
3.
4.
5.
2=TEST
Once a test is initiated Please Wait is displayed briefly followed by the
status screen.
Test Status Display
The Test Status display appears automatically during a test. The Test Sta-
tus display is similar to the status screen described in Chapter 12 "Status
Selection" on page 12-1, with additional prompts for the type of test and
the number of errors (for tests with a test pattern).
11-2
Select Test from the main menu by pressing 2, then press Enter. See
Figure 11-2.
Specify local or remote by selecting the corresponding number, fol-
lowed by Enter.
Use the Up and Down Arrows to view test options.
Select a test from the available options by pressing the corresponding
number, followed by Enter.
The example in Figure 11-2 shows the menu path for initiating a local
DTE and Loop test.
1=LOCAL UNIT
2=REMOTE UNIT
Figure 11-2. Initiating a Test
DSU III ARdc User Manual
1=DTE & LOOP(LL)
2=LOOP ONLY (RT)
3=DTE ONLY
4=DTE WITH TP
5=TEST PATTERN
6=SELF TEST
61200270L1-1
Advertisement
Table of Contents
Troubleshooting
