Dds Network Status; Loop Is Normal - ADTRAN DSU III ARdc User Manual

Chapter 12. Status Selection
DSU Operational Status
Possible messages include:
DATA MODE
The unit is ready to pass data if network status is normal.
UNIT IN TEST
The unit is in test. Scroll to next status menu for test type.
DTE COMMAND MODE
The unit is in command mode from the DTE (AT or V.25 bis).
In SW56 mode the following messages are possible:
IDLE
The unit is idle, waiting for a call or a dial command.
INCOMING CALL
The unit has detected an incoming call.
DIALING
The unit is dialing a number.

DDS Network Status

This line of the display shows the current status of the dedicated network
interface. Possible messages include:

LOOP IS NORMAL

The DSU is connected to the dedicated line. No line irregularity detected.
12-2 DSU III ARdc User Manual 61200270L1-1