Xmit Alrm; Clock Source - ADTRAN TSU LT User Manual

XMIT ALRM

CLOCK SOURCE

The clocking option selected always designates the clock
source for transmission. Clocking necessary for receiving
data is always recovered from incoming data.
61202060L2-1
Enables and disables the transmitting of performance report
messages (PRM) data on the facility data link (FDL). The
PRM data continues to be collected even if XMIT PRM is
disabled (possible only with ESF Format).
Choices: ENA, DISA
Selects the clock source for transmission toward the network
from the NI.
Choices: NETWORK, DTE, INTERNAL
TSU LT Clock Sources
The TSU LT is operable from various clock sources
permitting it to perform properly in many different
applications. The network interface clocking options are set
by using the Network Configuration menu options. Three
clock source options are available:
• Network timing
• DTE timing
• Internal timing
TSU LT User Manual
Chapter 5. Configuration Menu
5-3