Eia Remote Loopback; Figure 7-3. Eia Local Loopback Options; Table 7-3. Eia Local Loopback At Commands - ADTRAN DSU III ARdc User Manual

the DTE. The factory default setting is DISABLED. Figure 7-3 shows the
menu path used to access the EIA LLB option.
1=LOCAL
3=CONFIG
2=REMOTE ENTER ADDRESS
Table 7-3 shows the equivalent AT commands for setting the EIA LLB
options.

Table 7-3. EIA Local Loopback AT Commands

1=DISABLED
2=ENABLED

EIA Remote Loopback

The EIA RLB (Electronics Industries Association Remote Loopback)
option specifies whether or not the DSU III ARdc responds to the RLB
input from the DTE. The factory default setting is DISABLED. Figure 7-4
shows the menu path for the EIA RLB options.
61200270L1-1
1=NETWORK TYPE
2=DTE OPTIONS
3=TEST OPTIONS 2=RDL EN/DIS
4=DIAL OPTIONS
5=MANUAL

Figure 7-3. EIA Local Loopback Options

Front AT
Panel Command
_A0
_A1
DSU III ARdc User Manual
Chapter 7. Configuring Test Options
1=TEST TIMEOUT
3=EIA LLB EN/DIS
4=EIA RLB EN/DIS
Description
EIA LLB disabled
EIA LLB enabled
1=DISABLED
2=ENABLED
7-3