Figure 6-2. Dte Rates For Loop Rates Of 2.4, 9.6, 19.2, And 38.4 Kbps - ADTRAN DSU III ARdc User Manual

1=LOCAL
3=CONFIG
2=REMOTE

Figure 6-2. DTE Rates for Loop Rates of 2.4, 9.6, 19.2, and 38.4 kbps

The 1.2K setting is for data mode only. The unit will not respond to any in-band
command modes such as AT commands or V.25 bis. If any command modes are
set, they will be disabled when the 1.2K setting is selected.
61200270L1-1
1=NETWORK OPT.
2=DTE OPTIONS
ENTER ADDRESS
3=TEST OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND
DSU III ARdc User Manual
Chapter 6. Configuring DTE Options
1=DTE RATE 1=SAME AS LOOP
2=1.2K
2=CONNECTOR TYPE
3=DATA FORMAT
4=DTE CMD OPTION
5=TRANSMIT CLOCK
6=CS OPTIONS
7=ANTI-STREAM
8=CD OPTIONS
9=TR OPTIONS
A=SR OPTIONS
6-3