Chapter 5. Configuring Network Options
1=LOCAL
3=CONFIG
2=REMOTE ENTER ADDRESS 3=TEST OPTIONS
Figure 5-3. Enabling/Disabling Remote Configuration
Table 5-3 shows the equivalent AT commands used to enable or disable
remote configuration.
Table 5-3. Remote Configuration Commands
1=DISABLE
2=ENABLE
Network Type
This option configures the DSU III ARdc for the specific type of network
being used. The factory default setting is DEDICATED (see Fig-
ure 5-4).
5-4
1=NETWORK OPT.
2=DTE OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND
Front
AT
Panel
Command
&P4
&P5
DSU III ARdc User Manual
1=LOOP RATE
2=NETWORK ADDR
3=REMOTE CONFIG. 2=ENABLED
4=NETWORK TYPE
5=CLOCK SOURCE
Description
Disable remote configuration
Enable remote configuration
1=DISABLED
61200270L1-1