Chapter 7
TEST OPTIONS
The TEST OPTIONS menu enables or disables different test modes and
specifies the maximum test time allowed.
Test Timeout
The TEST TIMEOUT option sets the length of time a DSU III ARdc
remains in a test mode before automatically returning to the data mode.
Enter the timeout from 0 to 255 seconds. The factory default setting is off
(0). Figure 7-1 shows the menu path used to access TEST TIMEOUT.
1=LOCAL
3=CONFIG
2=REMOTE
Table 7-1 shows the equivalent AT commands for setting the TEST TIME-
OUT.
61200270L1-1
Configuring Test Options
1=NETWORK OPT.
2=DTE OPTIONS
3=TEST OPTIONS
ENTER ADDRESS
4=DIAL OPTIONS
5=MANUAL COMMAND
Figure 7-1. Setting Test Timeout Option
DSU III ARdc User Manual
1=TEST TIMEOUT
ENTER TIMEOUT
2=RDL EN/DIS
(0=OFF) : 00 SEC
3=EIA LLB EN/DIS
4=EIA RLB EN/DIS
7-1