Rln (Request List Of Numbers) - ADTRAN DSU III ARdc User Manual

If this command is entered with no parameters, the INVPS response is
returned. If no register number is included in the command or if it is
invalid, the INVPV response is returned. This response is also returned if
the number to be stored contains invalid characters. The characters 1, 2,
3, 4, 5, 6, 7, 8, 9, 0, P, T, and & are valid dial characters. If no digits are
issued with this command, the specified register is cleared. The DSU
responds with VAL.

RLN (Request List of Numbers)

This command causes the DSU III ARdc to return the number stored in
the specified register. The format of this command follows:
RLN
If the register number is invalid, the INVPV response is returned. When
a correct register number is entered, the following response is returned:
LSN
If no register number is present in the command, the DSU III ARdc
responds with a list of all the registers and the stored numbers. This list
is followed by the VAL response.
61200270L1-1
[REGISTER NUMBER]
[REGISTER NUMBER];[NUMBER STORED]VAL
DSU III ARdc User Manual
Chapter 2. Installation
2-11