Auto Answer; Figure 8-2. Enabling/Disabling The Auto Answer Function; Table 8-1. At Command For Storing Phone Numbers; Table 8-2. At Commands For Auto Answer - ADTRAN DSU III ARdc User Manual

Chapter 8. Configuring Dial Options

Table 8-1. AT Command for Storing Phone Numbers

Command

Auto Answer

The AUTO ANSWER option is used to specify how incoming calls are to
be answered. If ENABLED, incoming calls are automatically answered by
the DSU III ARdc. If DISABLED, an incoming call can be answered man-
ually by an AT or V.25 command from the DTE, or by raising TR from the
DTE. Figure 8-2 shows the menu path used to enable or disable this
option.
1=LOCAL
3=CONFIG
2=REMOTE

Figure 8-2. Enabling/Disabling the Auto Answer Function

Table 8-2 shows the AT Commands available for the AUTO ANSWER
option.

Table 8-2. AT Commands for Auto Answer

1=DISABLED
2=ENABLED
8-2
AT
&Zn= Store Phone Number
1=NETWORK TYPE
2=DTE OPTIONS
3=TEST OPTIONS
ENTER ADDRESS 4=DIAL OPTIONS
5=MANUAL
Front AT
Panel Command
_J0
_J1
DSU III ARdc User Manual
Description
1=PHONE NUMBER
2=AUTO ANSWER
Description
Auto Answer disabled
Auto Answer enabled
1=DISABLED
2=ENABLED
61200270L1-1