Omron CK3W-GC 00 Series Hardware User Manual page 218

6 Troubleshooting
A
ECAT LINK
(orange)
ON
Ethernet LINK
(orange)
ON
*1. For the details of errors that cannot be determined solely by checking the indicators, check the Sys.Status
register.
Refer to 6-4-1 Sys.Status Register List on page 6-10 for the Sys.Status flag.
6-4
B
OFF
OFF
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)
Non-fatal errors in the CPU Unit
EtherCAT physical layer link not
established
Ethernet physical layer link not
established
Interrupted communications
between Power PMAC IDE and
Programmable Multi-Axis Controller
DA output, DirectPWM output
and encoder power supply from
CK3W-AX Unit not output
Analog values from CK3W-AD
Unit not converted correctly
Position data for encoder
connected to CK3W-ECS Unit
not converted correctly
Position and ON/OFF of laser
connected to CK3W-GC Unit not
operating correctly
EtherNet/IP connection not
established
Error details cannot be deter-
mined solely by checking LEDs. *1