Omron CK3W-GC 00 Series Hardware User Manual page 213

Pin No.
Signal
10
OUT_COM1
11 NC
12 NC
13 NC
14 NC
15 NC
Shell Shield
*1. OUT0 is PWM output, and OUT1 is TCR output.
*2. OUT1 is available with the CK3W-GC£200 Units only.
Dedicated Cable
The dedicated cable for wiring to the laser connector is provided as an option.
The laser connection side has discrete wires.
Perform wiring to match the laser specifications.
The cable model is as shown below.
Type
For laser connection CK3W-CAES03A 3 m
6
1
11
15
5
10
Type Pin No. Cable color Mark
Pair 1 11
13
Pair 2 4
9
Pair 3 5
10
*1. OUT0 is PWM output, and OUT1 is TCR output.
*2. OUT1 is available with the CK3W-GC£200 Units only.
Note The cable shield is connected to the connector shell of the encoder connector.
Additional Information
You may use a self-made cable.
When you create a self-made cable, use a shielded twisted-pair cable to block the effects of
noise.
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)
XY
Input/Output
Output
*1 *2
-
-
-
-
-
Model Length
Signal
Blue Black Not wired
Blue Red Not wired
Pink Black OUT0
*1
Pink Red
OUT_COM0
Green Black OUT1
*1
Green Red
OUT_COM1
3000
24AWG x 3 Pairs
*1 *2
*1 *2
5 Wiring
5
35
10
Shield
5-49