Lexmark MX6500 User Manual page 96

Hide thumbs Also See for MX6500:
Table of Contents

Advertisement

Printing
If you insert the flash drive when the scanner requires attention, such as when a jam has occurred, then the
scanner ignores the flash drive.
If you insert the flash drive while the scanner is processing other print jobs, then Busy appears on the
scanner display. After these print jobs are processed, you may need to view the held jobs list to print
documents from the flash drive.
Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, any connector, the
memory device, or the scanner in the areas shown while actively printing, reading, or writing from the memory
device. Loss of data can occur.
2
From the scanner control panel, touch the document you want to print.
3
Touch the arrows to get a preview of the document.
4
Use
or
to specify the number of copies to print, and then touch Print.
Notes:
Do not remove the flash drive from the scanner USB port until the document has finished printing.
If you leave the flash drive in the scanner after leaving the initial USB menu screen, then touch Held Jobs on
the home screen to print files from the flash drive.
Supported flash drives and file types
Notes:
High‑speed USB flash drives must support the full‑speed standard. Low-speed USB devices are not supported.
USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology
File System (NTFS) or any other file system are not supported.
96

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx6500e

Table of Contents