Table of Contents
Advertisement
Troubleshooting
Scanner locked, release lock under scanner
1
Unlock the scan bar.
2
Touch Continue to clear the message and continue scanning.
Scanner maintenance required soon, use ADF Kit [80]
Contact customer support, and then report the message. The printer is scheduled for maintenance.
Serial option [x] error [54]
Try one or more of the following:
•
From the scanner control panel, touch Continue to continue printing.
•
Check that the serial cable is properly connected and is the correct one for the serial port.
•
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the scanner
and on the computer.
•
Turn off the scanner, and then turn it back on.
Serial port [x] disabled [56]
Try one or more of the following:
•
From the scanner control panel, touch Continue to clear the message.
The scanner discards any data received through the specified serial port.
•
Make sure Serial Buffer is not set to Disabled.
•
From the scanner control panel, set Serial Buffer to Auto in the Serial [x] menu.
Some held jobs were not restored
From the scanner control panel, touch Continue to delete the indicated job.
311
Advertisement
Table of Contents
