Table of Contents
Advertisement
Understanding the printer menus
Use
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Adjust ADF Skew
Auto
Off
On
ADF Multi‑feed Sensor
On
Off
Scan edge to edge
Off
On
Sharpness
1–5
Sample Copy
Off
On
To
Specify which color to drop and to adjust the dropout setting for each color threshold.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specify the contrast used for the copy job.
Note: Best for content is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a copy.
Note: 0 is the factory default setting.
Correct slight skew in the scanned image.
Note: Auto is the factory default setting.
Detect when the ADF picks more than one sheet of paper at once.
Note: On is the factory default setting.
Specify if the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness of a copy.
Note: 3 is the factory default setting.
Create a sample copy of the original document.
Note: Off is the factory default setting.
194
Advertisement
Table of Contents
