Table of Contents
Advertisement
Understanding the printer menus
Use
Fax Forwarding
Print
Print and Forward
Forward
Forward to
Fax
E‑mail
FTP
LDSS
eSF
Forward to Shortcut
Block No Name Fax
Off
On
Banned Fax List
Holding Faxes
Held Fax Mode
Off
Always On
Manual
Scheduled
Fax Holding Schedule
Punch
Off
On
Staple
Off
1 staple
Enable Color Fax Receive
On
Off
Fax Log Settings
Use
Transmission Log
Print log
Do not print log
Print only for error
To
Enable forwarding of received faxes to another recipient.
Note: Print is the factory default setting.
Specify the type of recipient to which faxes are forwarded.
Notes:
•
Fax is the factory default setting.
•
This menu is available only from the Embedded Web Server.
Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS,
or eSF).
Enable blocking of incoming faxes sent from devices with no station ID or fax ID
specified.
Note: Off is the factory default setting.
Enable the list of blocked fax numbers stored in the printer.
Enable the printer to hold received faxes from printing until they are released. Held
faxes can be released manually or at a scheduled day or time.
Note: Off is the factory default setting.
Specify whether prints are punched.
Note: Off is the factory default setting.
Specify whether prints are stapled.
Note: Off is the factory default setting.
Enable the printer to receive fax in color and print it in grayscale.
Note: On is the factory default setting.
To
Enable printing of a transmission log after each fax job.
Note: Print log is the factory default setting.
202
Advertisement
Table of Contents
