Table of Contents
Advertisement
Understanding the printer menus
Use
One Page Copy
Off
On
Output Lighting
Normal/Standby Mode
Off
Dim
Bright
Audio Feedback
Button Feedback
On
Off
Volume
1–10
Tactile Touchscreen Feedback
On
Off
Show Bookmarks
Yes
No
Allow Background Removal
On
Off
Allow Custom Job Scans
On
Off
Scanner Jam Recovery
Job level
Page level
Web Page Refresh Rate
30–300
Contact Name
Location
To
Set copies from the scanner glass to only one page at a time.
Note: Off is the factory default setting.
Set the amount of light from the standard bin.
Notes:
•
Dim is the factory default setting if Eco-Mode is set to Energy
or Energy/Paper.
•
Bright is the factory default setting if Eco-Mode is Off or set
to Paper.
Set the audio volume for the buttons.
Notes:
•
On is the factory default setting for Button Feedback.
•
5 is the factory default setting for Volume.
Provide touch‑screen sensation feedback.
Note: On is the factory default setting.
Specify whether bookmarks are displayed from the Held Jobs area.
Note: Yes is the factory default setting.
Specify whether image background removal is allowed.
Note: On is the factory default setting.
Scan multiple jobs to one file.
Note: On is the factory default setting. If On is selected, then the
Allow Custom Job Scans setting can be enabled for specific jobs.
Specify how a scanned job should be reloaded if a paper jam occurs
in the ADF.
Notes:
•
Job level is the factory default setting. If Job level is selected,
then rescan the entire job.
•
If Page level is selected, then rescan from the jammed page
forward.
Specify the number of seconds between Embedded Web Server
refreshes.
Note: 120 is the factory default setting.
Specify a contact name.
Note: The contact name is stored on the Embedded Web Server.
Specify the location.
Note: The location is stored on the Embedded Web Server.
187
Advertisement
Table of Contents
