Lexmark MX6500 User Manual page 58

Additional scanner and printer setup
If you are installing the scanner on an 802.1X network, then you may need the following:
• Authentication type
•
Inner authentication type
•
802.1X user name and password
•
Certificates
– No security
If your wireless network does not use any type of security, then you will not have any security information.
Note: We do not recommend using an unsecured wireless network.
Notes:
–
If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility
of the computer network adapter, and then look for the network name. If you cannot find the SSID or the
security information for your network, then see the documentation that came with the access point or contact
your system support person.
– To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation that
came with the access point, see the Embedded Web Server associated with the access point, or consult your
system support person.
Connecting the scanner using the Wireless Setup Wizard
Before you begin, make sure that:
•
A wireless network adapter is installed in the scanner and is working properly. For more information, see the
instruction sheet that came with the wireless network adapter.
•
An Ethernet cable is disconnected from the scanner.
•
Active NIC is set to Auto. To set this to Auto, navigate to:
> Network/Ports > Active NIC > Auto > Submit
Note: Make sure to turn off the scanner, then wait for at least five seconds, and then turn the scanner back on.
1
From the scanner control panel, navigate to:
> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup
2
Select a wireless connection setup.
Use
Search for networks
Enter a network name Manually type the SSID.
Wi‑Fi Protected Setup Connect the scanner to a wireless network using Wi‑Fi Protected Setup.
3
Follow the instructions on the scanner display.
To
Show available wireless connections.
Note: This menu item shows all broadcast secured or unsecured SSIDs.
Note: Make sure to type the correct SSID.
58