To Install Pc Card Support - HP OmniBook 2000 Evaluator Manual
Hp omnibook 2000: user guide
Hide thumbs
Also See for OmniBook 2000:
- User manual (69 pages) ,
- Service manual (119 pages) ,
- Installation and setup manual (101 pages)
Table of Contents
Advertisement
6. If prompted that a driver exists, choose New to install the new driver.
7. Click OK to close the Multimedia properties.
8. Shut down and restart Windows NT to activate the sound driver.
To install PC card support
Requirements
OmniBook 2000/5700 with Windows NT 4.0 installed.
OmniBook 2000/5700 drivers for PC card support.
Location: OmniBook hard drive and on the Recovery CD in
\OMNIBOOK\DRIVERS\NT\PCMCIA.FIX.
1. From the Start menu, click Programs, then click Windows NT Explorer.
2. From the View menu, click Options.
3. Click Show all files, then click OK.
4. Locate PCMCIA.SYS in the following directory:
C:\ <current WinNT dir>\system32\driver.
5. Rename the file to PCMCIA.OLD.
6. Copy the HP provided PCMCIA.SYS from the directory of the PC card driver to
C:\<current WinNT dir>\system32\driver directory.
7. Shut down and restart Windows NT to activate the PC card driver.
Using Windows NT 4.0
Installing Windows NT 4.0
5-7
Advertisement
Table of Contents
