Using Windows 95
Installing Windows 95
To install PC card support
Requirements
OmniBook 2000/5700 with Windows 95 installed.
HP OmniBook PC card drivers.
Location: OmniBook hard drive or on Recovery CD in
\DRIVERS\WIN95\950AONLY.
1. From Control Panel, double-click System.
2. Click Device Manager.
3. Remove all entries under PCMCIA socket, then close System Properties.
4. Copy all .VDX files from \DRIVERS\WIN95\950AONLY to
C:\WINDOWS\SYSTEM.
5. Answer Yes to overwrite the old .VXD files with the new .VXD files.
6. Copy all .INF files from \DRIVERS\WIN95\950AONLY directory to
C:\WINDOWS\INF.
7. Answer Yes to overwrite the old .INF files with the new .INF files.
8. Click Start, Run and type:
REGEDIT D:\OMNIBOOK\DRIVERS\WIN95\950AONLY\SYSOFT.REG
9. When you see a message that the registry has successfully been updated,
click OK
10. Shut down and restart Windows 95.
3-8