To Open The Dvd Drive Manually; To Install The Mpeg-2 Pc Card And Dvd Player Software - HP OmniBook 4100 - Notebook PC User Manual

Using OmniBook Plug-In Modules

To open the DVD drive manually

If you lose power to the OmniBook, or if you've removed the DVD module from the
OmniBook, you can manually open the DVD drive to remove a DVD disk.
Carefully insert a straightened paper clip into the emergency eject hole, as
shown below.

To install the MPEG-2 PC Card and DVD Player software

In order to play DVD movies, you must install the MPEG-2 PC Card and DVD Player
software included with your DVD module.
If you have Windows NT 4.0 on your OmniBook, you cannot play DVD movies.
Windows NT 4.0 does not support zoomed video.
1. Insert the DVD module in the plug-in module bay.
2. Insert the CD-ROM included with the MPEG-2 PC Card into the DVD drive.
3. Insert the MPEG-2 PC Card in the lower card slot.
4. When the PC Card is detected, follow the instructions to load the appropriate
driver from the CD-ROM.
1-16