HP OmniBook 2000 Evaluator Manual page 105

11. Click OK to Install Using Defaults for Monitor Type in the Monitor
12. Click Install to accept A:\ as the source directory.
13. If prompted to overwrite newer files, click Yes each time.
14. Remove the disk, then click OK when prompted.
15. Shut down and then reboot the system.
16. Open the OS/2 System folder, then System Setup, then double-click on System.
17. From the list of available screen resolutions, select one of the following
18. Close System, Shut Down , then reboot.
Important Use SETUP.CMD for the first installation of these video device drivers; thereafter, to
change video resolutions, repeat from step 16.
Configuration/Selection Utility window.
This will automatically test all video resolutions
After the installation program is finished, the display driver is initialized for
640x480x256 color.
resolution.
OmniBook 2000/5700CT 800x600 65,536 Colors
OmniBook 5700CTX 1024x768 65,535 Colors
See "Changing Screen Resolution" in the OS/2 User's Guide for more
information.
Using OS/2 Warp 4.0
Installing OS/2 Warp 4.0
6-7