Installing Cards; To Install A Xircom Ethernet Iips Pc Card - HP OmniBook 2000 Evaluator Manual
Hp omnibook 2000: user guide
Hide thumbs
Also See for OmniBook 2000:
- User manual (69 pages) ,
- Service manual (119 pages) ,
- Installation and setup manual (101 pages)
Table of Contents
Advertisement
Installing Cards
This section describes how to install the following:
PC card support.
Xircom Ethernet IIps PC card.
3Com 3C562 EtherLink III LAN+33.6 Modem PC card.
Intel EtherExpress PRO/100B PCI LAN adapter.
To install a Xircom Ethernet IIps PC card
Requirements
OmniBook 2000/5700 with Windows 95 installed.
Xircom Ethernet IIPS PC card.
Xircom driver: XPSNDIS (12/4/95) (Xircom Disk 2, Network Drivers Disk,
Version 2.3.
Windows 95A
1. While Windows 95 is running, insert the PC card.
The New Hardware Found window is displayed.
2. When prompted, insert the Xircom driver disk, then click OK.
3. With the A drive selected, click OK.
4. When prompted to insert Windows 95 Disk 2, enter the path
C:\WINDOWS\OPTIONS\CABS, then click OK.
5. Enter a Workgroup if applicable.
6. Remove the driver disk, then click Yes to reboot the OmniBook.
Using Windows 95
Installing Cards
3-15
Advertisement
Table of Contents
