To Install Sound Support - HP OmniBook 2000 Evaluator Manual

To install sound support

Requirements
1. From Control Panel, double-click Systems.
2. Click Device Manager.
3. Remove all devices under Other Devices, then click Close.
4. Shut down Windows 95.
5. Reset the OmniBook by pressing the Off button on the left side of the computer,
Important You must reset the OmniBook in order to successfully complete the Sound
installation.
6. Select Driver From Disk Provided By Hardware Manufacturer, then click OK.
7. Enter the sound drivers directory, then click OK.
8. If prompted, insert the Windows 95 Installation CD and change the directory to
OmniBook 2000/5700 with Windows 95 installed.
OmniBook 2000/5700 driver for sound support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\SOUND.
The joystick and audio hardware removal may cause the OmniBook to display
a blue screen with a message: Windows Fatal Exception. If this occurs, press
Ctrl+Alt+Del to restart the OmniBook. Then repeat steps 1-3. The error will be
corrected during the next hardware detection.
then pressing the blue On/Suspend button.
Windows 95 recognizes the Sound Controller and prompts you for the drivers.
D:\WIN95, then click OK.
Using Windows 95
Installing Windows 95
3-7