To Install A 3Com 3C562 Etherlink Iii Lan+33.6 Modem Pc Card - HP OmniBook 2000 Evaluator Manual
Hp omnibook 2000: user guide
Hide thumbs
Also See for OmniBook 2000:
- User manual (69 pages) ,
- Service manual (119 pages) ,
- Installation and setup manual (101 pages)
Table of Contents
Advertisement
Using Windows NT 3.51
Installing Cards
To install a 3Com 3C562 EtherLink III LAN+33.6 Modem
PC card
Requirements
OmniBook 2000/5700 with Windows NT 3.51 installed.
Windows NT 3.51 CD-ROM.
3Com 3C562 EtherLink III LAN+33.6 Modem PC card.
3Com 3C562 EtherLink III LAN+33.6 Modem PC card drivers disk.
Configuration
I/O Port: 0x300.
I/O Port Address: 0x300.
Memory Address 0xD4000.
Interrupt: 11.
Network.
This procedure assumes Windows NT networking has not been installed.
1. Insert the PC card.
2. If you are accessing the Windows NT installation files from the CD-ROM. make
sure the CD-ROM drive is installed and the floppy disk drive is connected to the
parallel port.
3. Connect ac power and restart Windows NT 3.51.
4. From Control Panel, double-click Network.
5. Click Yes to begin the Windows NT Network Installation.
6. Enter the directory of the Windows NT 3.51 installation files (D:\i386 if installing
from CD-ROM).
7. Select Do Not Detect in the Network Adapter Card Detection window.
8. Click Continue.
9. Select <Other> Requires disk from manufacturer, then click Continue.
10. Insert the 3Com drivers disk, change the directory to A:\NDIS\WINNT35, then
click OK.
4-10
Advertisement
Table of Contents
