Table of Contents
Advertisement
Important
Using Windows for Workgroups 3.11
Installing Windows for Workgroups 3.11
To install PC Card support
Requirements
OmniBook 3000 with Windows for Workgroups 3.11 installed.
OmniBook 3000 driver for PC Card support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\WFW\PCCARD
1. Create a directory called C:\CARDWIZ.
2. Copy all files from d:\OMNIBOOK\DRIVERS\WFW\PCCARD\CARDWIZ to
C:\CARDWIZ.
3. Enter the following lines into the C:\CONFIG.SYS in the order shown.
You can copy and paste these lines from the README.TXT file located in the PC
Card driver directory. The REM lines are not necessary. They are simply for
explaining the driver.
REM – OmniBook Socket Services driver required for card slot support
device=C:\CARDWIZ\SS365LP.EXE
REM -- Card Services driver required for card slot support
device=C:\CARDWIZ\CS.EXE /POLL:1
REM – Initial resource allocation required for card slot support
devicehigh=C:\CARDWIZ\CSALLOC.EXE
REM – ATA card driver required for ATA cards
devicehigh=C:\CARDWIZ\ATADRV.EXE /S:2
REM – Driver required for RAM cards
devicehigh=C:\CARDWIZ\MTSRAM.EXE
REM – Memory card driver required for all memory cards
devicehigh=C:\CARDWIZ\MTDDRV.EXE
2-8
Advertisement
Table of Contents
