HP OmniBook 2000 Evaluator Manual page 113

8. Click on Advanced Installation, then click Next. (Advanced installation allows
you to select the networking support you wish to install.)
9. Check Desired Network Services, then click Next. (This installation assumes you
are installing the File and Print service and the TCP/IP service.)
10. Select File and Print Services and enter the Workstation name, description and
Domain name.
11. Select User ID and password and enter your User ID and password twice.
12. Select TCP/IP Services and check DHCP if appropriate or enter your TCP/IP
information.
13. Select Network Adapters and Protocol Services, then click Change Adapter.
14. Click Other Adapter.
15. Insert the Intel Drivers Disk, then click OK to accept A:\.
16. Click OK to accept Intel EtherExpress PRO/100B OS/2 Adapter and Ethernet.
17. Remove the floppy disk, then click OK when prompted.
18. Click Install.
19. Click OK to begin the installation.
20. If the OS/2 Warp Tuning Assistant changed your NetBIOS parameters, click OK.
21. Click OK to shut down OS/2.
22. Press Ctrl+Alt+Del to reboot.
Using OS/2 Warp 4.0
Installing Cards
6-15