To Install Pointing Device Support; To Install Pc Card Support - HP OmniBook 6000 - Notebook PC Evaluation Manual

To install pointing device support

If you've installed a retail version of Windows 95, you can install pointing device
support.
The integrated pointing device(s) is fully supported by the Synaptics Touchpad driver.
With the standard PS/2 mouse driver the integrated pointing device(s) will function, but
will be without most special features.
The touchpad files are located on the Recovery CD under
\HP\DRIVERS\W95\Touchpad.
1. Run SETUP.EXE from the \HP\DRIVERS\W95\Touchpad subdirectory.
2. Follow the instructions and restart to complete the installation.
For more detailed information about the touchpad drivers, see the readme.txt file in the
touchpad directory.

To install PC Card Support

If you have installed Windows 95, you will need to install PC Card support. This driver is
located on the Recovery CD in \HP\DRIVERS\W95\PCCARD.
1. Copy all files from \HP\DRIVERS\W95\PCCARD\950CONLY on the Recovery CD
to C:\WINDOWS\OPTIONS\CABS.
2. Copy the PCMCIA.INF file from the \HP\DRIVERS\W95\PCCARD\950CONLY on
the Recovery CD to C:\WINDOWS\INF.
3. Click Yes to overwrite any files.
4. From Control Panel, open System, then Device Manager.
5. Remove both "PCI CardBus Bridge" devices under Other Devices. Click OK in the
Confirm Device Removal dialog box each time.
6. Click on the Refresh button to redetect the Texas Instruments PCI TI-1420 Cardbus
Controller.
7. Close the Device Manager.
8. Click Yes to restart Windows 95.
Using Windows 95
Installing Windows 95
Corporate Evaluator's Guide 121