Using Windows NT 3.51
Installing Cards
Installing Cards
This section describes how to install the following:
PC card support.
Xircom Ethernet IIps PC card.
3Com 3C562 EtherLink III LAN+33.6 Modem PC card.
Intel EtherExpress PRO/100B PCI LAN adapter.
To install the Xircom Ethernet IIps PC card
Requirements
OmniBook 2000/5700 with Windows NT 3.51 installed.
Xircom Ethernet IIps PC card.
Windows NT 3.51 CD-ROM.
Xircom Drivers Disk v2.30.
Configuration
I/O Port: 0x300.
Memory Address: 0xD4000.
Interrupt: 11.
Mode: I/O Mode.
Cable Type: Auto Detect.
This procedure assumes that Windows NT Networking has not been installed.
1. Insert the PC card.
2. If you are accessing the Windows NT installation files from the CD-ROM make
sure the CD-ROM drive is installed and the floppy disk drive is connected to the
parallel port.
3. Connect ac power, then restart Windows NT 3.51.
4. From Control Panel, click Network.
4-8