To Stop The Omnibook - HP OmniBook 2000 Evaluator Manual

To stop the OmniBook

Two of the four stop options feature "Instant On" which allows you to quickly
resume where you left off. The preferred stopping method depends on how you
intend to use the OmniBook next.
To stop with "Instant-On":
Press the blue On/Suspend
button while ac power is
connected.
To stop with "Instant-On":
Press the blue On/Suspend
button while on battery
power.
To shut down and save your
current session: press
FN+F12 while on battery
power.
To shut down without
saving your session: shut
down Windows, then press
the square Off button on the
left side of the case for two
seconds. (Windows 95
automatically turns off the
OmniBook when you shut
down.)
Power Management
Display Off: Ready to continue immediately.
Maintains external connections. Standard
method for Windows 95 and Windows for
Workgroups if ac power is connected.
Suspend: Ready to resume immediately. You
intend to continue within 24 hours. Standard
method for Windows 95 and Windows for
Workgroups if ac power is not connected.
Hibernate: Preserves work in progress.
Reboots at turn-on, restores the session. Saves
battery power. External connections are lost.
Off: Reboots at turn-on. Previous session is
not saved. Saves maximum battery power.
External connections are lost. (Standard
method for Windows NT and OS/2.)
Introduction
1-7